dmesg - Intel Core i5-2430M
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-30-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #44-Ubuntu SMP Thu Aug 22 20:52:24 UTC 2013 (Ubuntu 3.8.0-30.44-generic 3.8.13.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000b9809fff] usable
BIOS-e820: [mem 0x00000000b980a000-0x00000000b9abbfff] reserved
BIOS-e820: [mem 0x00000000b9abc000-0x00000000bbfc4fff] usable
BIOS-e820: [mem 0x00000000bbfc5000-0x00000000bc8f4fff] reserved
BIOS-e820: [mem 0x00000000bc8f5000-0x00000000bcb74fff] ACPI NVS
BIOS-e820: [mem 0x00000000bcb75000-0x00000000bcffefff] ACPI data
BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fff10000-0x00000000fff16fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.00 by HPQ
efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbc0a5718
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x0000000000075000) (0MB)
efi: mem02: type=3, attr=0xf, range=[0x0000000000075000-0x000000000008f000) (0MB)
efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x0000000000097000) (0MB)
efi: mem05: type=4, attr=0xf, range=[0x0000000000097000-0x0000000000098000) (0MB)
efi: mem06: type=3, attr=0xf, range=[0x0000000000098000-0x00000000000a0000) (0MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
efi: mem08: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002344000) (19MB)
efi: mem10: type=7, attr=0xf, range=[0x0000000002344000-0x0000000036100000) (829MB)
efi: mem11: type=2, attr=0xf, range=[0x0000000036100000-0x0000000037078000) (15MB)
efi: mem12: type=7, attr=0xf, range=[0x0000000037078000-0x0000000087d43000) (1292MB)
efi: mem13: type=2, attr=0xf, range=[0x0000000087d43000-0x00000000b51c3000) (724MB)
efi: mem14: type=4, attr=0xf, range=[0x00000000b51c3000-0x00000000b67e6000) (22MB)
efi: mem15: type=7, attr=0xf, range=[0x00000000b67e6000-0x00000000b6cf4000) (5MB)
efi: mem16: type=1, attr=0xf, range=[0x00000000b6cf4000-0x00000000b6d12000) (0MB)
efi: mem17: type=7, attr=0xf, range=[0x00000000b6d12000-0x00000000b6d30000) (0MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000b6d30000-0x00000000b6d78000) (0MB)
efi: mem19: type=3, attr=0xf, range=[0x00000000b6d78000-0x00000000b7188000) (4MB)
efi: mem20: type=4, attr=0xf, range=[0x00000000b7188000-0x00000000b7fb6000) (14MB)
efi: mem21: type=3, attr=0xf, range=[0x00000000b7fb6000-0x00000000b7fc5000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000b7fc5000-0x00000000b7fc6000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000b7fc6000-0x00000000b941b000) (20MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000b941b000-0x00000000b941e000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000b941e000-0x00000000b980a000) (3MB)
efi: mem26: type=5, attr=0x800000000000000f, range=[0x00000000b980a000-0x00000000b9abc000) (2MB)
efi: mem27: type=4, attr=0xf, range=[0x00000000b9abc000-0x00000000ba179000) (6MB)
efi: mem28: type=7, attr=0xf, range=[0x00000000ba179000-0x00000000ba17a000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x00000000ba17a000-0x00000000ba17b000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x00000000ba17b000-0x00000000ba17c000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x00000000ba17c000-0x00000000ba17f000) (0MB)
efi: mem32: type=7, attr=0xf, range=[0x00000000ba17f000-0x00000000ba180000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x00000000ba180000-0x00000000ba1a6000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x00000000ba1a6000-0x00000000ba1a7000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x00000000ba1a7000-0x00000000ba1cf000) (0MB)
efi: mem36: type=7, attr=0xf, range=[0x00000000ba1cf000-0x00000000ba1d5000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x00000000ba1d5000-0x00000000babe0000) (10MB)
efi: mem38: type=2, attr=0xf, range=[0x00000000babe0000-0x00000000babea000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000babea000-0x00000000bbfc5000) (19MB)
efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000bbfc5000-0x00000000bc084000) (0MB)
efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000bc084000-0x00000000bc090000) (0MB)
efi: mem42: type=6, attr=0x800000000000000f, range=[0x00000000bc090000-0x00000000bc093000) (0MB)
efi: mem43: type=5, attr=0x800000000000000f, range=[0x00000000bc093000-0x00000000bc098000) (0MB)
efi: mem44: type=6, attr=0x800000000000000f, range=[0x00000000bc098000-0x00000000bc099000) (0MB)
efi: mem45: type=5, attr=0x800000000000000f, range=[0x00000000bc099000-0x00000000bc0a4000) (0MB)
efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000bc0a4000-0x00000000bc0a6000) (0MB)
efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000bc0a6000-0x00000000bc0c5000) (0MB)
efi: mem48: type=6, attr=0x800000000000000f, range=[0x00000000bc0c5000-0x00000000bc0f5000) (0MB)
efi: mem49: type=0, attr=0xf, range=[0x00000000bc0f5000-0x00000000bc7e5000) (6MB)
efi: mem50: type=0, attr=0xf, range=[0x00000000bc7e5000-0x00000000bc8f5000) (1MB)
efi: mem51: type=10, attr=0xf, range=[0x00000000bc8f5000-0x00000000bcb49000) (2MB)
efi: mem52: type=10, attr=0xf, range=[0x00000000bcb49000-0x00000000bcb75000) (0MB)
efi: mem53: type=9, attr=0xf, range=[0x00000000bcb75000-0x00000000bcfcc000) (4MB)
efi: mem54: type=9, attr=0xf, range=[0x00000000bcfcc000-0x00000000bcfff000) (0MB)
efi: mem55: type=4, attr=0xf, range=[0x00000000bcfff000-0x00000000bd000000) (0MB)
efi: mem56: type=7, attr=0xf, range=[0x0000000100000000-0x000000013f800000) (1016MB)
efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem59: type=11, attr=0x8000000000000000, range=[0x00000000fff10000-0x00000000fff17000) (0MB)
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP ProBook 4430s/167E, BIOS 68SRR Ver. F.40 03/12/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BE000000 mask FFE000000 uncachable
4 base 0BD800000 mask FFF800000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 13F800000 mask FFF800000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0xbcffffff]
[mem 0x00000000-0xbcffffff] page 2M
kernel direct mapping tables up to 0xbcffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x13f7fffff]
[mem 0x100000000-0x13f7fffff] page 2M
kernel direct mapping tables up to 0x13f7fffff @ [mem 0xbabe8000-0xbabe9fff]
RAMDISK: [mem 0x36100000-0x37077fff]
ACPI: RSDP 00000000bcffe014 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bcffe120 0006C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
ACPI: FACP 00000000bcffc000 000F4 (v03 HPQOEM 167E 0000000F HP 00000001)
ACPI: DSDT 00000000bcfd2000 248EA (v02 HPQOEM 167E 00000001 INTL 20060912)
ACPI: FACS 00000000bcb50000 00040
ACPI: HPET 00000000bcffb000 00038 (v01 HPQOEM 167E 00000001 HP 00000001)
ACPI: APIC 00000000bcffa000 000BC (v01 HPQOEM 167E 00000001 HP 00000001)
ACPI: MCFG 00000000bcff9000 0003C (v01 HPQOEM 167E 00000001 HP 00000001)
ACPI: ASF! 00000000bcff8000 000A5 (v32 HPQOEM 167E 00000001 HP 00000001)
ACPI: SSDT 00000000bcfcf000 00283 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
ACPI: SSDT 00000000bcfce000 0048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
ACPI: SSDT 00000000bcfcd000 007CE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 00000000bcfcc000 009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
Initmem setup node 0 [mem 0x00000000-0x13f7fffff]
NODE_DATA [mem 0x13f7fb000-0x13f7fffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013edfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0008efff]
node 0: [mem 0x00090000-0x0009ffff]
node 0: [mem 0x00100000-0xb9809fff]
node 0: [mem 0xb9abc000-0xbbfc4fff]
node 0: [mem 0xbcfff000-0xbcffffff]
node 0: [mem 0x100000000-0x13f7fffff]
On node 0 totalpages: 1029283
DMA zone: 64 pages used for memmap
DMA zone: 143 pages reserved
DMA zone: 3776 pages, LIFO batch:0
DMA32 zone: 11957 pages used for memmap
DMA32 zone: 753247 pages, LIFO batch:31
Normal zone: 4064 pages used for memmap
Normal zone: 256032 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000b980a000 - 00000000b9abc000
PM: Registered nosave memory: 00000000bbfc5000 - 00000000bc8f5000
PM: Registered nosave memory: 00000000bc8f5000 - 00000000bcb75000
PM: Registered nosave memory: 00000000bcb75000 - 00000000bcfff000
PM: Registered nosave memory: 00000000bd000000 - 00000000e00f8000
PM: Registered nosave memory: 00000000e00f8000 - 00000000e00f9000
PM: Registered nosave memory: 00000000e00f9000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fff10000
PM: Registered nosave memory: 00000000fff10000 - 00000000fff17000
PM: Registered nosave memory: 00000000fff17000 - 0000000100000000
e820: [mem 0xbd000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013f400000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013055
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3848028k/5234688k available (7014k kernel code, 1117556k absent, 269104k reserved, 6229k data, 996k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.543 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.08 BogoMIPS (lpj=9578172)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26715 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19156.34 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbc8f5000-0xbcb74fff] (2621440 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bc89d718 0069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
ACPI: SSDT 00000000bc89ea98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
ACPI: SSDT 00000000bc89cd98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: Power Resource [APPR] (off)
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xd4000000-0xd43fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xd4a04000-0xd4a0400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xd4a09000-0xd4a093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xd4a00000-0xd4a03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xd4a08000-0xd4a083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x5068-0x506f]
pci 0000:00:1f.2: reg 14: [io 0x5074-0x5077]
pci 0000:00:1f.2: reg 18: [io 0x5060-0x5067]
pci 0000:00:1f.2: reg 1c: [io 0x5070-0x5073]
pci 0000:00:1f.2: reg 20: [io 0x5040-0x505f]
pci 0000:00:1f.2: reg 24: [mem 0xd4a07000-0xd4a077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4900000-0xd49fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:23:00.0: [197b:2392] type 00 class 0x088000
pci 0000:23:00.0: reg 10: [mem 0xd4803000-0xd48030ff]
pci 0000:23:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
pci 0000:23:00.2: reg 10: [mem 0xd4802000-0xd48020ff]
pci 0000:23:00.3: [197b:2393] type 00 class 0x088000
pci 0000:23:00.3: reg 10: [mem 0xd4801000-0xd48010ff]
pci 0000:00:1c.2: PCI bridge to [bus 23]
pci 0000:00:1c.2: bridge window [mem 0xd4800000-0xd48fffff]
pci 0000:24:00.0: [168c:002b] type 00 class 0x028000
pci 0000:24:00.0: reg 10: [mem 0xd4700000-0xd470ffff 64bit]
pci 0000:24:00.0: supports D1
pci 0000:24:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 24]
pci 0000:00:1c.3: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:25:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:25:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:25:00.0: reg 18: [mem 0xd4404000-0xd4404fff 64bit pref]
pci 0000:25:00.0: reg 20: [mem 0xd4400000-0xd4403fff 64bit pref]
pci 0000:25:00.0: supports D1 D2
pci 0000:25:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 25]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
pci 0000:26:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:26:00.0: reg 10: [mem 0xd4500000-0xd4501fff 64bit]
pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 26]
pci 0000:00:1c.7: bridge window [mem 0xd4500000-0xd45fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xb980a000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbbfc5000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io 0xfe00-0xfe0f] has been reserved
system 00:03: [io 0xfe80-0xfe8f] has been reserved
system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:06: [io 0x0200-0x027f] has been reserved
system 00:06: [io 0x1000-0x100f] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0xffff] has been reserved
system 00:06: [io 0x0400-0x047f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [io 0xef80-0xef9f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs SYN0186 SYN0100 SYN0002 PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:23:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xbfd00000-0xbfdfffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd4900000-0xd49fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-22]
pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci 0000:23:00.0: BAR 6: assigned [mem 0xbfd00000-0xbfd0ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 23]
pci 0000:00:1c.2: bridge window [mem 0xd4800000-0xd48fffff]
pci 0000:00:1c.2: bridge window [mem 0xbfd00000-0xbfdfffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 24]
pci 0000:00:1c.3: bridge window [mem 0xd4700000-0xd47fffff]
pci 0000:00:1c.5: PCI bridge to [bus 25]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xd4600000-0xd46fffff]
pci 0000:00:1c.5: bridge window [mem 0xd4400000-0xd44fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 26]
pci 0000:00:1c.7: bridge window [mem 0xd4500000-0xd45fffff]
pci 0000:00:1c.0: enabling device (0000 -> 0002)
pci 0000:00:1c.1: enabling device (0000 -> 0003)
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xd4900000-0xd49fffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
pci_bus 0000:23: resource 1 [mem 0xd4800000-0xd48fffff]
pci_bus 0000:23: resource 2 [mem 0xbfd00000-0xbfdfffff pref]
pci_bus 0000:24: resource 1 [mem 0xd4700000-0xd47fffff]
pci_bus 0000:25: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:25: resource 1 [mem 0xd4600000-0xd46fffff]
pci_bus 0000:25: resource 2 [mem 0xd4400000-0xd44fffff 64bit pref]
pci_bus 0000:26: resource 1 [mem 0xd4500000-0xd45fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: enabling device (0000 -> 0002)
pci 0000:00:1d.0: enabling device (0000 -> 0002)
pci 0000:26:00.0: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15840k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb11c3000-0xb51c3000] (64MB) mapped at [ffff8800b11c3000-ffff8800b51c2fff]
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1378381704.904:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 7750
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
pci 0000:23:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:26:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 1c12 ss_vid 103c ss_did 167e
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (off-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (57 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (40 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (47 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (29 C)
thermal LNXTHERM:05: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (0 C)
thermal LNXTHERM:06: registered as thermal_zone6
ACPI: Thermal Zone [DM1Z] (0 C)
thermal LNXTHERM:07: registered as thermal_zone7
ACPI: Thermal Zone [DM2Z] (0 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4a09000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4a08000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-30-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:26:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:26:00.0: irq 50 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-30-generic xhci_hcd
usb usb3: SerialNumber: 0000:26:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-30-generic xhci_hcd
usb usb4: SerialNumber: 0000:26:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
ACPI: Battery Slot [BAT0] (battery present)
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 3a8155c013f798de7084673b6e86215ebed17697'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
rtc_cmos 00:07: setting system clock to 2013-09-05 11:48:25 UTC (1378381705)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 996k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1168k freed
Freeing unused kernel memory: 1076k freed
udevd[107]: starting version 175
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:25:00.0: irq 51 for MSI/MSI-X
sdhci-pci 0000:23:00.0: SDHCI controller found [197b:2392] (rev 30)
sdhci-pci 0000:23:00.0: enabling device (0000 -> 0002)
r8169 0000:25:00.0 eth0: RTL8168e/8111e at 0xffffc9000067e000, 10:1f:74:ed:92:58, XID 0c200000 IRQ 51
r8169 0000:25:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 52 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
mmc0: SDHCI controller on PCI [0000:23:00.0] using DMA
sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd4a07000 port 0xd4a07100 irq 52
ata2: SATA max UDMA/133 abar m2048@0xd4a07000 port 0xd4a07180 irq 52
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA50A, max UDMA/100
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54756 JEDO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: new high-speed USB device number 2 using ehci-pci
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2394.562 MHz
Switching to clocksource tsc
usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-1.1: SerialNumber: 0030c0845289
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ATAPI: hp DVD A DS8A5LH, 1H68, max UDMA/100
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM hp DVD A DS8A5LH 1H68 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.3: new low-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB OPTICAL MOUSE
usb 1-1.3: Manufacturer: PIXART
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.3/input0
usb 2-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0461, idProduct=4dc7
usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-1.4: Product: HP HD Webcam [Fixed]
usb 2-1.4: Manufacturer: Primax Electronics Ltd.
usb 2-1.4: SerialNumber: PMX02
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=0cf3, idProduct=3005
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Adding 3972092k swap on /dev/sda4. Priority:-1 extents:1 across:3972092k
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[477]: starting version 175
type=1400 audit(1378381722.828:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=610 comm="apparmor_parser"
type=1400 audit(1378381722.828:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=562 comm="apparmor_parser"
type=1400 audit(1378381722.828:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
type=1400 audit(1378381722.828:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=562 comm="apparmor_parser"
type=1400 audit(1378381722.828:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
type=1400 audit(1378381722.828:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=562 comm="apparmor_parser"
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 53 for MSI/MSI-X
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
microcode: Microcode Update Driver: v2.00 , Peter Oruba
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux video capture interface: v2.00
lp: driver loaded but no devices found
wmi: Mapper loaded
jmb38x_ms 0000:23:00.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dc7)
cfg80211: Calling CRDA to update world regulatory domain
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits 3DC sensor found
input: HP WMI hotkeys as /devices/virtual/input/input5
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
usbcore: registered new interface driver btusb
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
kvm: disabled by bios
i915 0000:00:02.0: irq 55 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ath9k 0000:24:00.0: enabling device (0000 -> 0002)
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010c20000, irq=19
fbcon: inteldrmfb (fb0) is primary device
psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400, board id: 1398, fw id: 781874
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:03: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
init: failsafe main process (918) killed by TERM signal
type=1400 audit(1378381725.392:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1030 comm="apparmor_parser"
type=1400 audit(1378381725.392:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1030 comm="apparmor_parser"
type=1400 audit(1378381725.396:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1033 comm="apparmor_parser"
type=1400 audit(1378381725.396:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1033 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (1150) terminated with status 1
ppdev: user-space parallel port driver
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:25:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: anacron main process (1095) killed by TERM signal
init: plymouth-stop pre-start process (1917) terminated with status 1
wlan0: authenticate with 64:70:02:b2:c7:f6
wlan0: send auth to 64:70:02:b2:c7:f6 (try 1/3)
wlan0: authenticated
wlan0: associate with 64:70:02:b2:c7:f6 (try 1/3)
wlan0: RX AssocResp from 64:70:02:b2:c7:f6 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: VN
ath: regdomain 0x82c0 updated by CountryIE
ath: EEPROM regdomain: 0x82c0
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3
ath: Country alpha2 being used: VN
ath: Regpair used: 0x3
cfg80211: Regulatory domain changed to country: VN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
systemd-hostnamed[4868]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[11539]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[15371]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: deauthenticating from 64:70:02:b2:c7:f6 by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: anacron main process (8160) killed by TERM signal
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
PM: suspend of devices complete after 659.682 msecs
PM: late suspend of devices complete after 0.150 msecs
pcieport 0000:00:1c.7: System wakeup enabled by ACPI
r8169 0000:25:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 95.747 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 16
Broke affinity for irq 19
Broke affinity for irq 52
smpboot: CPU 3 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 206.138 msecs
PM: early resume of devices complete after 0.090 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: setting latency timer to 64
pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
mei 0000:00:16.0: irq 53 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
r8169 0000:25:00.0: System wakeup disabled by ACPI
usb 2-1.4: reset high-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata2.00: configured for UDMA/100
usb 2-1.6: reset full-speed USB device number 4 using ehci-pci
usb 2-1.6: device firmware changed
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 2771.926 msecs
usb 2-1.6: USB disconnect, device number 4
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 2-1.6: new full-speed USB device number 5 using ehci-pci
init: anacron main process (8457) killed by TERM signal
usb 2-1.6: New USB device found, idVendor=03f0, idProduct=311d
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver ath3k
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 2-1.6: USB disconnect, device number 5
r8169 0000:25:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 2-1.6: new full-speed USB device number 6 using ehci-pci
usb 2-1.6: New USB device found, idVendor=0cf3, idProduct=3005
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
wlan0: authenticate with 64:70:02:b2:c7:f6
wlan0: send auth to 64:70:02:b2:c7:f6 (try 1/3)
wlan0: authenticated
wlan0: associate with 64:70:02:b2:c7:f6 (try 1/3)
wlan0: RX AssocResp from 64:70:02:b2:c7:f6 (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: VN
ath: regdomain 0x82c0 updated by CountryIE
ath: EEPROM regdomain: 0x82c0
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3
ath: Country alpha2 being used: VN
ath: Regpair used: 0x3
cfg80211: Regulatory domain changed to country: VN
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
systemd-hostnamed[8917]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
hub 1-1:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-1.3: USB disconnect, device number 4
usb 1-1.3: new low-speed USB device number 5 using ehci-pci
usb 1-1.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB OPTICAL MOUSE
usb 1-1.3: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.3/input0
systemd-hostnamed[11370]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
hub 1-1:1.0: port 3 disabled by hub (EMI?), re-enabling...
usb 1-1.3: USB disconnect, device number 5
usb 1-1.3: new low-speed USB device number 6 using ehci-pci
usb 1-1.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB OPTICAL MOUSE
usb 1-1.3: Manufacturer: PIXART
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
hid-generic 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.3/input0